Build your very own wall mounted weight rack for an incomparable workout!
Skill Level
Estimated Cost
Estimated Time
Tools & Materials
SteelTek Supplies (3/4"):
(4) Standard Railing Flange - (673-204HC)
(20) 90 Degree Elbow - (672-406HC)
(16) Single Socket Tee - (670-106HC)
(2) 48" Non-Threaded Pipe
(20) 4" Non-Threaded Pipe
Other Supplies:
(8) Stud Wood Screws
Tools:
(1) Drill
(1) Allen Wrench - 6 Millimeters
How To
Stage 1
Building Vertical Bars
To begin, you will be assembling the two vertical bars. These will need to be mirrored so the screws are facing towards the outside making it easier for adjusting heights.
Build exactly how you see in above image.
Stage 2
Marking Flange Holes
Using the help of a friend, hold the bars against the wall to mark the Standard Railing Flange holes and the wall. Use these marks to pre-drill your holes.
Stage 3
Installing Vertical Flanges and Vertical Bars
Remove Standard Railing Flanges from pipe to easily secure to the wall.
Lastly, insert the 4” pipes (attached to vertical bars) back into the Standard Railing Flanges (secured to the wall) and tighten the set screws.