- Products
-
Projects
- Coding Table
- Train Table
- Buffet Table
- Target Range
- Candle Holder
- Decorative Bench
- Outside Bench
- Napkin Holder
- Step Stool
- Fence Wood Rack
- Accessory Holder
- Plant Hanger
- Mail Slot Table
- Coffee Cart
- Bench
- Kitchen Island Rack
- Full Bed
- Gym Hooks
- TV Console
- Bar Top
- Wall Mounted Barbell Rack
- Swivel Table
- Mailbox
- TV Stand
- Console Shelf
- Full Bed
- Towel and Toilet Paper Rack
- Garage Shelf
- Coat Rack
- Stool
- Garage Workbench
- Living Room Table
- Outdoor Railing
- Bookshelf
- Wall Shelf
- Small Shelf
- Entryway Coat Rack
- Decorative Serving Cart
- Serving Station
- Serving Cart
- Corner Desk
- Conference Room Table
- Side Table
- Hallway Table
- Lamp
- Lamps
- Coffee Table
- Decorative Coffee Table
- Worktable
- Blog
- About
- Contact
Products
Projects
Blog
About
Contact
Serving Station
Expert level design, very unique, stylish and versatile for any household.
Skill Level
Estimated Cost
Estimated Time
Tools & Materials
Steel•Tek Supplies (3/4"):
- (12) Adjustable Side Outlet - (674-804HC)
- (8) Combination Socket - (676-504HC)
- (4) Flange - (673-104HC)
- (4) Three Socket Tee - (670-404HC)
- (4) Rail Support - (674-304HC)
- (4) Hook - (678-204HC)
- (2) 12" Non-Threaded Pipe
- (7) 18" Non-Threaded Pipe
- (5) 24" Non-Threaded Pipe
- (4) 36" Non-Threaded Pipe
- (2) 38" Non-Threaded Pipe
Other Supplies:
- (8) Flat Head Wood Screws 3/4" length; must be #12 or higher
- (3) Wood Top - 48" w x 26.75" long x 1.5" thick
Tools:
- (1) Allen Wrench - 6 Millimeters
How To
Stage 1
Base Assembly
Bottom Base:
- Attach Three Socket Tee to end of 24" pipe.
- Attach 12" pipe to other end of Three Socket Tee.
- Attach middle hole of Combination Socket onto the ends of each 18" pipe so the bottom is facing inside, then tighten set screws.
- Make sure middle hole of Three Socket Tee is facing up. Tighten set screws.
- Slide the bottom of Combination Socket onto the ends of each 24" pipe and 12" pipe. Tighten set screws.
Middle Base:
- Attach Three Socket Tee to end of 24" pipe.
- Attach 12" pipe to other end of Three Socket Tee.
- Slide Hooks onto front 12" pipe and tighten set screws.
- Attach middle hole of Combination Socket onto the ends of each 18" pipe so the bottom is facing inside, then tighten set screws.
- Make sure middle hole of Three Socket Tee is facing down. Tighten set screws.
- Slide the bottom of Combination Socket onto the ends of each 24" pipe and 12" pipe. Tighten set screws.
Stage 2
Leg Assembly
- Slide 36" pipes through the predrilled corner holes of wood, through the Combination Sockets and into flanges.
- Slide 12" pipes through the predrilled middle holes of wood and into the top of Three Socket Tees.
- Tighten set screws.
Stage 3
Middle Railing
- Attach Adjustable Side Outlet onto each end of 24" pipe and 18" pipe, as shown in picture.
- Slide Adjustable Side Outlets (attached to 18" pipe) onto left legs and slide Adjustable Side Outlets (attached to 24" pipe onto front left and front middle legs.
Stage 4
Middle Base Attachment
- Take Middle Base built in Stage 1 and slide Combination Sockets through 36" pipes until the Three Socket Tees rest on middle 12" pipes.
- Tighten set screws.
Stage 5
Table Top Assembly
Table Top Assembly:
- Slide Hooks onto 38" pipe and then slide Adjustable Side Outlet onto each end of 38" pipe. Tighten set screws.
- Slide Rail Support onto 18" pipe and then attach Adjustable Side Outlet to ends of 18" pipe. Tighten set screws.
Securing Table Top:
- Secure Rail Support to table top with (8) wood screws.
Stage 6
Middle and Top Attachment
- Slide predrilled middle wood piece onto 36" vertical pipes until it rests on pipes and fittings.
- Slide 36" pipes into Adjustable Side Outlets attached to top wood piece and tighten set screws.