Start by attaching an 12” pipe and 10’ pipe together using a Coupling (674-904HC). create two of these.
Take a different 10’ pipe and slide a Three Socket Tee (670-404HC) over the top, measure 12” down and tighten set screws.
Slide a Three Socket Tee (670-404HC) under the bottom of the same 10’ pipe, measure 32” up and tighten set screws. Create this twice mirroring the first the one just assembled.
Stage 2
Setting Frame
Take both 12” and 10’ combo pipe and attache them to the bottom Three Socket Tees (670-404HC) and the Top Three Socket Tees (670-404HC) then tighten set screws.
This is built with wooden feet made from 2x4’s. There is a PVC pipe what is secured by pipe straps that hold the bottom metal bars to the wooden feet and the pipe slides into the PVC pipes.
Stage 3
Attaching Screen
Finished the frame off with 150” projector screen.
Attach screen using bungee cords or preferred method of securing.
Steel•Tek Professional Tip
Any Projector Screen can be used by adjusting the lengths of the pipe.