Start by taking a 3/8” x 36” pipe and slide 7 Hooks (678-202HC) on the pipe. The Hooks (678-202HC) should be equal distance apart then tighten set screws.
Stage 2
Attaching Rail Supports
Take two Rail Supports (674-302HC) and slide them onto each end of 36” pipe then tighten set screws.
Stage 3
Installing Rail Supports
Make sure the Rail Support screw holes on the bases are 32” apart so the screws can go into the studs. We suggest using #12 screws because the screw heads are bigger than the holes.