Target Range
Create your very own Target Range!
Tools & Materials
SteelTek Supplies (3/4"):
- (2) Elbow - (672-504HC)
- (2) Side Outlet Tee - (671-604HC)
- (8) Hook - (678-204HC)
- (2) Double Swivel Socket - (676-704HC)
- (4) Single Swivel Socket - (677-304HC)
- (2) 120" Non-Threaded Pipe
- (4) 60" Non-Threaded Pipe
- (2) 36" Non-Threaded Pipe
- (2) 24" Non-Threaded Pipe
Other Supplies:
- Chains for hanging targets
- Targets
Tools:
- Allen Wrench - 6 Millimeter
How To
Step 1
Building A Frame
- The items you will need to build this first step are: x1 Elbow (672-504HC), x1 Side Outlet Tee (671-604HC), x1 Double Swivel Socket (676-704HC), x2 Single Swivel Socket (677-304HC), x1 24” Non Threaded Pipe, x1 36” Non Threaded Pipe, x2 60” Non Threaded Pipe.
- Take the 36” pipe and slide the middle hole of the Double Swivel Socket (676-704HC) until centered then tighten set screws. Attache an Elbow (672-504HC) to the top of 24“ pipe then tighten set screw.
- Take the 24” pipe and slide the middle hole of the Side Outlet Tee (671-604HC) until centered then tighten set screw.
- Attach the bottom of a Single Swivel Socket (677-304HC) to each end of the 24” pipe then tighten set screws.
- Take the 36” pipe and slide the bottom of the pipe into the vertical hole of the Side Outlet Tee (671-604HC), attached to the 24” pipe, then tighten set screw.
- Slide each 60” pipe through the open hole of the Single Swivel Socket (677-304HC) and into the open holes of the Double Swivel Socket (676-704HC) then tighten set screws.
- Build this step twice for each leg.
Step 2
Building Base
- Take one of the 120” pipes and slide x8 Hook (678-204HC) on the pipe. You will want x4 Hooks (678-204HC) facing towards the right and x4 Hooks (678-204HC) facing towards the left. Space them accordingly then tighten set screws.
- This is where you connect the two A frames together.
- Take two 120” pipes and connect them together using the Elbows (672-504HC) and Side Outlet Tees (671-604HC) connected to the A frame. You want the pipe with the hooks on the top and the other pipe in the middle.
Step 3
Attaching Targets
- Its Time to hang your targets.
- Chains and metal plated were used with this design but any type of target can be used.