SteelTek
Shooting Target

Shot need some work? Build a custom target using SteelTek!

Skill Level beginner
Estimated Cost less
Estimated Time clock-15

Tools & Materials

SteelTek Supplies (1-1/4"):
  • (2) Side Outlet Tee - (681-604HC)
  • (5) 6' Pipe
Other Supplies:
  • Chain
  • Nuts and Bolts
  • Target Substrate
Tools:
  • Allen Wrench - 8 Millimeter
  • Socket Wrench
  • Drill

How To

Step 1

Building Frame

Stage 1
  • Feed the 72” horizontal pipe through the through holes of the Single Socket Tees (671-606HC).
  • Measure about 6” - 12” from the en of the pipe and make sure the fittings are facing the same direction then tighten set screws.
  • Insert a 72” pipe into each open hole of the Single Socket Tee (671-606HC). There should be two holes in each fitting equaling 4 hole total then tighten set screws.
  • Measure about 6” - 12” from the en of the pipe and make sure the fittings are facing the same direction then tighten set screws.

Step 2

Attaching Target

Stage 2
  • Install target with whatever method works best. In this project a chain was used and secured through the cahin with nuts and bolts.

Step 3

Final

Stage 3