SteelTek
Serving Station

Unique and stylish design for an expert level builder.

Skill Level expert
Estimated Cost most
Estimated Time clock-60

Tools & Materials

:
Other Supplies:
  • (8) Flat Head Wood Screws 3/4" length; must be #12 or higher
  • (3) Wood Top - 48" w x 26.75" long x 1.5" thick
Tools:
  • (1) Allen Wrench - 6 Millimeters

How To

Step 1

Base Assembly

Stage 1

Bottom Base:

  • Attach Three Socket Tee to end of 24" pipe.
  • Attach 12" pipe to other end of Three Socket Tee.
  • Attach middle hole of Combination Socket onto the ends of each 18" pipe so the bottom is facing inside, then tighten set screws.
  • Make sure middle hole of Three Socket Tee is facing up. Tighten set screws.
  • Slide the bottom of Combination Socket onto the ends of each 24" pipe and 12" pipe. Tighten set screws.

Middle Base:

  • Attach Three Socket Tee to end of 24" pipe.
  • Attach 12" pipe to other end of Three Socket Tee.
  • Slide Hooks onto front 12" pipe and tighten set screws.
  • Attach middle hole of Combination Socket onto the ends of each 18" pipe so the bottom is facing inside, then tighten set screws.
  • Make sure middle hole of Three Socket Tee is facing down. Tighten set screws.
  • Slide the bottom of Combination Socket onto the ends of each 24" pipe and 12" pipe. Tighten set screws.

Step 2

Leg Assembly

Stage 2
  • Slide 36" pipes through the predrilled corner holes of wood, through the Combination Sockets and into flanges.
  • Slide 12" pipes through the predrilled middle holes of wood and into the top of Three Socket Tees.
  • Tighten set screws.

Step 3

Middle Railing

Stage 3
  •  Attach Adjustable Side Outlet onto each end of 24" pipe and 18" pipe, as shown in picture.
  • Slide Adjustable Side Outlets (attached to 18" pipe) onto left legs and slide Adjustable Side Outlets (attached to 24" pipe onto front left and front middle legs.

Step 4

Middle Base Attachment

Stage 4
  • Take Middle Base built in Stage 1 and slide Combination Sockets through 36" pipes until the Three Socket Tees rest on middle 12" pipes.
  • Tighten set screws.

Step 5

Table Top Assembly

Stage 5

Table Top Assembly:

  • Slide Hooks onto 38" pipe and then slide Adjustable Side Outlet onto each end of 38" pipe. Tighten set screws.
  • Slide Rail Support onto 18" pipe and then attach Adjustable Side Outlet to ends of 18" pipe. Tighten set screws.

Securing Table Top:

  • Secure Rail Support to table top with (8) wood screws.

Step 6

Middle and Top Attachment

Stage 6
  • Slide predrilled middle wood piece onto 36" vertical pipes until it rests on pipes and fittings.
  • Slide 36" pipes into Adjustable Side Outlets attached to top wood piece and tighten set screws.