Towel and Toilet Paper Rack

Towel and Toilet Paper Holder

Skill Level
Estimated Cost
Estimated Time

Tools & Materials

SteelTek Supplies (3/4"):

  • (10) Flange - (673-106HC)
  • (2) 90 Degree Elbow - (672-406HC)
  • (1) 24" Non-Threaded Pipe
  • (1) 18" Non-Threaded Pipe
  • (1) 6" Non-Threaded Pipe
  • (5) 4" Non-Threaded Pipe

Other Supplies:

  • Wood Screws

Tools:

  • (1) Allen Wrench - 6 Millimeters

How To

Stage 1

Installing Flanges

  • Start by installing Flanges into wall with wood screws.
  • If you use an 18” pipe then the Fanges will need to be 15.75” apart.
  • If you use a 24” pipe then the Flanges will need to be 21.75” apart.

Stage 2

Attaching Pipe and Fittings

  • Slide your a 4” pipe into each Flange and tighten set screws.
  • Attach an Elbow on each end of 18” and 24” pipe and on one end of 6” pipe.

Stage 3

Installing Towel and Toilet Paper Bars

  • Take bars built in Stage 2 and slide Elbows onto 4” pipe and tighten set screws.